Flexseals Sichem S50
DESCRIPTION Sichem S50 is a sheet containing PTFE with hollow glass microspheres. SERVICE S50 is specially designed for use in flanges where only low bolt loading is available. Such flanges can be glass lined, ceramic, plastic or be so distorted...
DESCRIPTION
Sichem S50 is a sheet containing PTFE with hollow glass microspheres.
SERVICE
S50 is specially designed for use in flanges where only low bolt loading is available.
Such flanges can be glass lined, ceramic, plastic or be so distorted that they include areas of low gasket stress.
Suitable for sealing all chemicals across the whole pH range (0-14) with the exception of molten alkali metals, Fluorine gas, hydrogen fluoride or materials which may generate these.
Maximum peak temperature: +315°C
Minimum & maximum working temperature: -200°C + 260°C
Maximum recommended pressure: 5.0Mpa (50bar)
item No. |
Thickness range & sheet size |
Code No. |
FM292 |
1.0mm x 1500mm x 1500mm |
Special Gasket for low temp -200°C |
FM293 |
1.5mm x 1500mm x 1500mm |
|
FM294 |
2.0mm x 1500mm x 1500mm |
|
FM295 |
3.0mm x 1500mm x 1500mm |
TYPICAL PHYSICAL PROPERTIES
Thickness: 2.0mm
Density: 1.4g/cm3
DIN3535-6 EKSW Compressibility: 32%
DIN3535-6 ERSW Recovery: 7%
ASTM Gas Permeability: <0.01ml/min
ASTM tensile Strength: 11Mpa
DIN3535-6 Leakage: 0.05 mgs -1m-1
DIN 3535-6 Creep Relaxation: 19%
CERTIFICATION
Cerisie – Italy
FDA – Italy
SANITIZED – Switzerland
Material Safety Data Sheet – Italy
Technical Data Sheet – Italy